How To Replace Frigidaire 316075104 Bake Element

 
By:
 
Replacing the bake heating element on your Frigidaire built range is very easy.  In most cases, it should only take about 10 minutes.  The most common element used in Frigidaire ovens is part number 316075104.  This is the newest version of this element, some of the older part numbers for this element were 316075103 and 316075102, but they have been replaced with the newer 316075104 part number.
 
Note - This element is made by Frigidaire, but it may also found in these other brands:  Admiral, Crosley, Gibson, Kelvinator, Kenmore, Montgomery Wards, Tappan, White Westinghouse
 
Here is how to replace the 316075104 in your range:
 
First, before working on the stove, make sure it is unplugged.
 
Next, open the door and remove both of the oven racks.
 
Now remove the two 1/4" mounting screws on the back oven wall.
316075104 Bake Element Screws
 
Here is a closeup of the 1/4" mounting screw.
316075104 Mounting Screw
 
Now carefully pull the element out of the back of the range.  Make sure the wires do not catch on anything and become disconnected.  There is not much extra wire, only about 1-2".
316075104 Wire
 
With the element pull out, carefully disconnect the spade terminals from the element.
316075104 Wire Disconnected
 
Reinstall the new heating element in the reverse order.
 
If your heating element is burned out and you need to order a new one, click the link below:
 
Frigidaire Bake Heating Element - 316075104
316075104 Element
 
 
blog comments powered by Disqus