Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
1/4 inch nut driver

Customer:
Joseph , CA

Bake Element was burned out and needed replacement.

My Repair & Advice:

Shut off power.  Remove oven racks. Remove two 1/4 inch screws at back of oven holding the bake element into place. Carefully pull bake element out of back of oven. Unplug wires from bake element being very careful not to allow wires to pull back into the opening in back of the oven. Install new element using the reverse order. Worked like a charm.

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
I believe it was a 1/4" nut driver

Customer:
Eric, WA

Bake heat element (lower one) was burnt out

My Repair & Advice:

If your bake function doesn't work but the broil still does then your bake heat element is probably bad. Just make sure the bake switch is off, loosen 2 screws holding the element in place, pull the element out a little bit to expose the wire connectors, unplug connectors and put new element in place, plug in and screw it back in place. Parts Dr rocks!

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
Screw driver, small ratchet

Customer:
Michael, AL

Bottom bake element was broken and needed replaced.

My Repair & Advice:

Very easy, self explanatory. Part ordered was a perfect match. Oven works perfect now. Save about $40. , compared to other sites with same part using several different part numbers for the same item.

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Easy 2/5

Time of repair:
0 - 15 minutes

Tools:
nut driver

Customer:
Jared, WI

heating element burned out

My Repair & Advice:

unplug appliance, electrical leads to elements are live on one side even when element is off, easy fix access through oven door onlt 2 screws and 2 terminals to connect

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
Socket

Customer:
Yousef, FL

Bake element stopped working.

My Repair & Advice:

Very easy replacement, it took less than 15 minutes. Make sure to unplug the power cord. Remove the 2 hex screws from inside the oven where the element connects and pull the wires out gently making sure to hold them from sliding back. Connect the wires to the new element and put screws back and done. The price of this element was a fraction of what it sells for somewhere else. I would highly recommend partsdr.

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
Screw driver.

Customer:
Philip, FL

The oven stopped working. The broiler element still heated and the stove top worked but the "Bake" element was not heating.

My Repair & Advice:

This was a super easy replacement. Two screws and two wires. When I first removed it, before ordering the replacement, I used a multi-meter to check continuity and there was none which indicated the element was bad. I ordered from Parts Dr. and it arrived quickly and in good condition. Been baking ever since. Great experience and it hearkens back to what you used to expect from American business. Very happy and will do business with Parts Dr. again if the need arises.

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Very Easy 1/5

Time of repair:
0 - 15 minutes

Tools:
1/4 inch nut driver You may also need pliers

Customer:
Joseph, GA

Bake element not heating

My Repair & Advice:

Super easy. Two screws and two plugs and you're done. Make sure to unplug the power first!

Was this story helpful to you?

Parts used:
316075104

Difficulty level:
Easy 2/5

Time of repair:
0 - 15 minutes

Tools:
nut driver

Customer:
tod, SC

Burned out bake element

My Repair & Advice:

Turn off power to oven. remove screws from each side and pull element out slowly as not to pull wire loose. remove wires from old element and bend so they do not go back into oven wall. secure wires to new element and push back into oven. Replace srews and turn power back on.

Was this story helpful to you?